12" Polycarbonate LED Wall Pack
LED Wall Mounts
USE OF PRODUCT
The intended use of this product is for any outdoor commercial or industrial building accent decorative wall mount, public access area, recreation areas, stairwell & corridor applications.
Rugged die cast aluminum housing. Front housing is hinged with stainless steel hinged pins and safety cable for easy access to fixture compartment. Top and side coin plugs for easy conduit access.
Textured architectural bronze powdercoat finish over a precise chromate conversion coating. Available in standard dark polyester bronze or consult factory for made to order architecural finishes.
Specular anodized aluminum reflector with vandal resistant polycarbonate prismatic lens. Lens is sealed by a one-piece silicon gasket prohibits entrance outside contaminants.
High output LEDs offer a minimum estimated operating life of 50,000 hours in 3000K, 3500K, 4000K, or 5000K (standard) with CRI>83. LEDs placed on high performance aluminum heatsink for reduced junction temperatures and extended life.
Durable and long lasting LED driver operates at 120-277V and boasts a 90% power factor at 50 to 60 Hz with 0-10V Dimming Constant Current. Driver protections includes: Output open load, over-current and short-circuit, and over-temperature with auto recovery. Step down transformer may be utilized for 480V or 347V applications.
Mounted over a 4” recessed outlet box or use a 1/2” surface conduit.
• CSA - Suitable for wet locations.