15" Polycarbonate Round LED Luminaire
LED Wall Mounts
USE OF PRODUCT
The intended use of this product is for decorative wall mount, building accents, pedestrian walkways, public access areas, or to accent landscape areas.
15” diameter rugged die cast surface mount housing.
Matt-finished, architectural bronze powdercoat over a precise chromate conversion coating. Available in standard dark polyester bronze or consult factory for made to order architectural finishes.
Specular anodized aluminum reflector with vandal resistant
polycarbonate prismatic lens. Lens is sealed by a one-piece silicon gasket which prohibits entrance of outside contamination.
High output LEDs offer a minimum estimated operating life of 50,000 hours in 3000K, 3500K, 4000K, or 5000K (standard) with CRI>83. LEDs placed on high performance aluminum heatsink for reduced junction temperatures and extended life.
Durable and long lasting LED driver operates at 120-277V and boasts a 90% power factor at 50 to 60 Hz with 0-10V Dimming Constant Current. Driver protections includes: Output open load, over-current and short-circuit, and over-temperature with auto recovery. -30ºC Min Temp. 40ºC Max Temp. Step down transformer may be utilized for 480V or 347V applications.
Cast-in template for mounting directly over a 4” recessed outlet box or use a 1/2” surface conduit.
• CSA -Suitable for wet location.